1-12 of 143 results
Cold Rolling of Nuclear-Grade 316L Stainless Steel Tubes
- Sep 29, 2026
- Hits: 7
Abstract To address the significant dimensional variations observed during the finish rolling of nuclear-grade 316L seamless stainless steel tubes, this study combines experimental investigations with...
Corrosion Behavior of Shale Gas Gathering and Transportation Pipelines in SRB/CO₂ Environments
- Sep 25, 2026
- Hits: 13
Abstract To investigate the corrosion characteristics and mitigation strategies for shale gas gathering and transportation pipelines exposed to sulfate-reducing bacteria (SRB) and CO₂-containing environments,...
Ductile Iron Pipeline Installation Technology for Water Supply Engineering
- Aug 31, 2026
- Hits: 13
Abstract: The Yangqu Raw Water Direct Supply Project, part of the Shanxi Wanjiazhai Yellow River Diversion Project, successfully completed the installation of DN1000 ductile iron pipelines using...
Optimization and Application of Centrifugal Casting Process for Ductile Iron Pipes
- Jul 31, 2026
- Hits: 24
Abstract: Owing to their excellent mechanical properties and corrosion resistance, ductile iron pipes are widely used in municipal water supply, gas transmission, and industrial fluid transportation....
Leakage Failure Analysis of an Ultra-High-Pressure Ethylene Plant Pipeline
- Jan 31, 2026
- Hits: 33
Abstract: Leakage in ultra-high-pressure steam pipelines is a common issue in ethylene plants. This study investigates the causes of leakage in an ultra-high-pressure pipeline at an ethylene...
Delamination Defects in High-Strength Low-Alloy Steel Pipes: Causes, Analysis, and Process Optimization
- Dec 30, 2025
- Hits: 61
Abstract: Microscopic morphology observations and thermodynamic analysis indicate that the delamination defects in 374.65 mm × 18.65 mm 110S casing resulted from an excessive concentration...
Cause Analysis and Solutions for Oblique Cracks in Welded Low-Alloy Steel Square Tubes
- Nov 30, 2025
- Hits: 42
Abstract: This paper examines the formation of oblique weld cracks in square tubes made from Q355B low-alloy hot-rolled steel strip and analyzes the underlying causes. A 7.75 mm steel strip...
Impact Sampling Methods for Thin-Walled Austenitic Stainless Steel Seamless Pipes
- Oct 30, 2025
- Hits: 47
Abstract: ASTM A370-2022 requires surface removal for impact specimens, which conflicts with ASME B31.3-2022, where undercooling must be considered if the notch width is less than 80% of the material...
Analysis of Weld Seam Cracking in 441 Stainless Steel Pipes During Flaring
- Oct 27, 2025
- Hits: 21
Abstract: This study investigates weld seam cracking that occurred during the flaring process of 441/2D plate welded pipes produced by Jiugang and provides a comparative analysis with materials from...
The Standardized Selection of Pipes and Fittings in Residential Community Water Supply Projects
- Sep 30, 2025
- Hits: 78
Abstract The safe operation of residential community water supply systems is closely tied to the proper selection of pipes and fittings. This study examines the technical regulations designed to...
High-Alloy Cr-Mo Steel Plate for High-Temperature Pipes: Microstructure and Mechanical Properties
- Sep 30, 2025
- Hits: 18
Abstract This study examines the production process, associated challenges, implemented countermeasures, and performance characteristics of high-alloy Cr-Mo steel plates for high-temperature-resistant...
Submarine Water Pipeline Design for Zhanjiang Jianjiang Water Supply Project
- Aug 24, 2025
- Hits: 17
Abstract: To improve the stability and safety of water supply systems, a construction plan for a submarine water pipeline was developed. Using the Zhanjiang Jianjiang Water Supply Hub Project...